There are at two walls in a Large Maj'Dul Residence that have bugs, though each one has its own issue. Wall #1 The longer rooms near the outside door has a placement bug. Can put certain post items (Ornate Brellium Sconce, Banner of the Harbor, Elaborate Brellium Sconce) into the wall as with most walls. Yet one cannot put a Mirrored Sumac Platform (set vertical) into the wall at any small amount. If using the layout editor or notepad and putting the mirror more than 0.5 will make the mirror vanish. Have tried shunting a divider in from the roof, but that makes the divider invisible to most angles, and as such the mirror vanishes from most viewing angles. Ended up getting the Mirrored Sumac Platform close, and put a 92° angle on it - was the least downward angle I could use, though 93 showed the floor more. Looking at the wall ~ Location: -26.75, 0.90, 12.47 ~ Orientation: 0.07, 0, 0 Side View - Closest the Mirrored Sumac Platform can get to the wall.
Wall #2 This one is the really buggy one. If approaching the wall in 3rd-person view, there are a few areas that will zoom the camera forward like you are standing under some low object. Location: 1.90, 0.05, 20.20 ~ Orientation: 262.34, 0, 0 Location: 1.00, 0,07, 24.06 ~ Orientation: 264.71, 0, 0 Location: -2.08, 0.83, 26.28 ~ Orientation: 261.19, 0, 0 Location: 1.50, 0,04, 13.23 ~ Orientation: 265.52, 0, 0 Location: 1.11, 0.05, 16.80 ~ Orientation:260.22, 0, 0 Went to place two different objects here on the wall (3.03, 0.05, 24.12) and got the green placement appearance on both Draconic Tapestry & Darklight Placard. And even on the ground-floor-placed Narrow Divider of Briarwood... And the placed wall items vanished on placement! Luckily I have a telepad on the roof. Looking down from the roof I can see the missing placard. Enabled editing and pushed the placard back into the wall. Ran back to the room and seen a hovering placard in the middle of the room. Items placed on (or from) the floor are safe - as long as they do not touch the wall. The only exception is the far corner (3.03, 0.91, 27.37) Banner of the Harbor. Can we get a fix for at least this one wall, please?
Yet another wall bug. Found this out after putting in a "water system" with outside wind power & drill/pump. Noticed there was an off-set outer wooden structure being pushed inside the room, when it should be on the outside like most other Maj'Dul buildings. As I was walking in from the outside patio has seen this image 'flicker'. Clearly this wooden thing should be on the outside of the wall. Looking up from the corner (-41.58, -0.08, 19.82) Looking in from the roof sky-window view Yet... Looking at the wall area of the large rectangular room, when walking in from the entrance area cannot see this wooden anomaly. Must be some adjustment issue between this wall and the other room that pushes east to west. Looking down the wall from the outside/roof. No wooden window-covers here.
