EQ skipping log entries

Discussion in 'Player Support' started by Seering, Nov 20, 2015.

  1. Seering New Member

    Anyone seen issue where EQ does not logs all files.
    Does not seem to be related to lag or latency.

    Example:
    I'm in the middle of the guild hall with almost noone and very little happening.
    Manually type in the following , then up shift up arrow backspace and change the entry #.0

    /group test entry 1
    /group test entry 2
    ..
    /group test entry 10

    Then go look at the logs .. ..
    I see 1, 2, 3, 7

    EQ and the OS are installed on 2 separate SSD hard drives...
    No real latency or lag even with raiding with almost everything enabled -
    Intel I5 running around 4ghz, 16 gig of ram ..
    benchmarks and stress testing show no problems


    Looking for ideas on why i seem to be dropping logs.
  2. Brudal Augur

    What size is the overall log file and what is your /loginterval set at?
  3. Seering New Member

    Guess i should have mentioned that ..
    log was rotated off .. currently under 5 megs ... (they archive out at 100).
    /loginterval is at 0.

    And it looks like it could be related to the samsung magician cache software that loads over the SSD drive... doing more testing now ..very odd
  4. Seering New Member

    disregard the cache issue still happens with it disabled.
  5. Seering New Member

    Some additional details ..
    Happens on the boot SSD drive .. and the game SSD drive.
    Does not seem to be occurring on the storage drive normal 2TB HDD.

    Throughput on both SSD are MUCH higher both read and write than the HDD, a few hours of read / write stress testing on each of the 3 all show no problem and consistent results ..